Air Filters (Engine Intake)¶
Category code: air-filters · SKUs: 12 · Status: catalog-confirmed
| SKU | Description | Efficiency | Data status |
|---|---|---|---|
42N-62-15470 |
Komatsu loader intake air filter cross-referenced under OE number 42N-62-15470, listed in the heavy-machinery engine-intake category. dimensions, media and efficiency are reference values only. For loaders working high-dust off-highway duty, buyers should prioritise confirmed dust-holding capacity and intake-restriction control over a nominal efficiency label. Before committing a bulk line, verify the form factor, pleat construction and ISO 5011 capacity against the OE drawing and request the spec sheet rather than relying on the catalogue alone. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
P778989 |
Air-compressor intake filter referenced by OE number P778989 for the Mitsubishi L200/Storm family, catalogued under the air-compressor subcategory. The source records the Mitsubishi OE number and the compressor application; the parameters here are reference-grade, not source-confirmed. Compressor intake runs a high-velocity, high-dust airflow, so capacity and pressure-drop behaviour matter at least as much as raw efficiency. From a sourcing perspective, buyers should verify the housing form factor and the exact compressor model before ordering, and treat the cross-reference as a discovery aid. Request the spec sheet for dimensions, media and efficiency before a bulk commitment. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
P822768 |
Heavy-duty machinery air filter cross-referenced under OE numbers P822768 and P822769 for Case, Caterpillar and Hitachi equipment, grouped in the heavy-duty intake subcategory. The catalogue confirms the OE numbers and the heavy-machinery application but dimension, media and grade are recorded as reference figures. Across the Case/Cat/Hitachi range the same OE reference can map to different housings, so our advice is to verify the specific machine model and the element form factor before committing volume. Check media type and ISO 5011 efficiency/dust-capacity figures on the spec sheet, since per-model values are not published here and must be verified against the OE drawing. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
1542743 |
Volvo engine-parts air filter cross-referenced under OE numbers 1542743, 1660619 and 475388 for truck applications, listed in the heavy-duty intake subcategory. The source confirms the Volvo truck OE references; these fields are carried as reference values rather than a verified spec. Volvo trucks run sustained high-dust intake duty, so dust-holding capacity and restriction control are the figures that decide service interval. From a sourcing perspective, buyers should pin down the exact chassis and housing before ordering and treat the triple OE reference as a starting point. Request the spec sheet to verify dimensions and capacity against the OE drawing before a bulk order. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
626095 |
Air-compressor filter element cross-referenced under OE numbers 626095, P626096 and P626104, catalogued in the air-compressor intake subcategory. The source lists the three OE references but the spec figures are reference, not catalogue-verified. Compressor intake filtration is compact and housing-specific, which makes form-factor confirmation the critical first step. Our advice: verify the exact compressor model and element form factor, then request the spec sheet for media, dimensions and efficiency. Do not treat the triple OE reference as a fitment guarantee until it is checked against the drawing. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
178017810 |
PowerCore engine air filter cross-referenced under OE numbers 178017810 and 17801-7810 for Hino trucks, catalogued in the PowerCore intake subcategory. PowerCore construction adds a compact pleated-media option for space-limited housings, but the source media, size and grade are reference values here. Hino truck duty favours high dust capacity and low restriction over long hauls, so our advice is to confirm the exact truck model and housing before committing. Request the spec sheet for dimensions, media and ISO 5011 efficiency/dust-capacity data, and verify the cross-reference against the OE drawing rather than assuming fitment from the number. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
8-98260-8340 |
PowerCore air filter cross-referenced under OE numbers 8-98260-8340 and 8982608340 for Isuzu trucks, listed in the PowerCore intake subcategory. The source confirms the Isuzu truck OE references but the parameters are reference-grade figures to verify on the spec sheet. PowerCore's compact pleated construction suits tight truck housings, yet the same reference can span several Isuzu chassis, so fitment must be verified. From a sourcing perspective, buyers should verify the exact model and housing form factor, then request the spec sheet for dimensions, media and ISO 5011 capacity. Treat the OE number as a cross-reference, not a verified match. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
P608677 |
Primary obround PowerCore air filter cross-referenced under OE number P608677, replacing Mack 57MD321M and covering Mack, Volvo and Wirtgen equipment in the PowerCore subcategory. The source records the OE reference and the equipment span but no source-confirmed spec is attached; the values are reference-grade As a primary-stage obround element, its role is high dust capacity ahead of the safety element. Our advice: verify the exact machine and the obround dimensions before ordering, since the Mack/Volvo/Wirtgen span implies several housings. Request the spec sheet for media, dimensions and ISO 5011 figures and verify against the OE drawing. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
P623400 |
PowerCore truck air filter cross-referenced under OE numbers P623400, PA32001 and P635170, catalogued in the PowerCore intake subcategory. The source lists the three OE references but dimensions, media and efficiency are reference values only. PowerCore's compact pleated media suits space-limited truck housings, yet the triple reference is a discovery aid rather than a fitment guarantee. From a sourcing perspective, buyers should confirm the exact truck model and housing form factor first, then request the spec sheet for dimensions, media and ISO 5011 capacity. Verify the cross-reference against the OE drawing before a bulk order. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
2116040258 |
Tractor engine honeycomb air filter under OE number 2116040258, listed in the round intake subcategory for agricultural equipment. The source confirms the tractor application and the honeycomb element description but the parameters here are reference-grade, not source-confirmed. Agricultural duty runs heavy in field dust, so capacity and restriction control drive service life more than a nominal efficiency number. Our advice: verify the exact tractor model and the round-element dimensions before ordering, then request the spec sheet for media and ISO 5011 dust-capacity data. Treat the OE number as a cross-reference to be verified against the drawing. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
AF55014 |
Round air filter cross-referenced under OE numbers AF55014 and AF55308 for tractors, combines and ATVs, replacing 222035, listed in the round intake subcategory. The source records the multi-equipment OE reference but dimension, media and grade are recorded as reference figures. Because the reference spans tractors, combines and ATVs, the same number family can map to different housings, so fitment confirmation is essential. From a sourcing perspective, buyers should specify the exact equipment model and verify the round-element dimensions, then request the spec sheet for media and ISO 5011 figures. Do not treat the OE reference as a verified fitment. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |
P643118 |
PowerCore honeycomb compressed-air filter cross-referenced under OE numbers P643118, P318005 and RE288552, catalogued in the air-compressor intake subcategory. The source lists the three OE references and the PowerCore honeycomb construction but these fields are carried as reference values rather than a verified spec. Compressed-air intake is compact and housing-specific, so form-factor confirmation is the first gating step. Our advice: verify the exact compressor model and element dimensions, then request the spec sheet for media and efficiency. Treat the triple OE reference as a discovery point and verify against the drawing before committing volume. | ISO 5011 (>=99.9% primary) |
catalog-confirmed |